ARCTIC P8 PWM - Pressure-optimised 80 mm Fan with PWM

ARCTIC P8 PWM - Pressure-optimised 80 mm Fan with PWM

80 x 25 mm, 200 - 3000 RPM, 23.4 CFM, 39.76 m³/h, 0.3 Sone, 12V DC, 81 g

Trade Prices

Distributor Product SKU Stock Updated Price
EET

P8 Pwm - Pressure-Optimised

ACFAN00149A Register free see stock

Reasons To Buy

Optimised for Static Pressure

During the development of the new P8 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM is particularly suitable for use on heatsinks and radiators.

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.<br>Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.<br>The new ARCTIC motor has a four times longer service life through its low coil temperature.<br>Consequently, we have extended the warranty to 10 years.

200 to 1800 RPM regulated via PWM

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM.<br>In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Two Way Installation

Push warm air out of the case<br>Pull cool air into your case

Description

Not only that we at ARCTIC free the IT world from noise – we care for the right sound as well!

As an international company, our expertise extends over noise reduction in PCs to consumer electronics products.

Specifications

Performance
Suitable locationComputer case
Pulse-width modulation (PWM) supportYes
Fan connector4-pin
TypeFan
Fan diameter8 cm
Supported processor socketsNot supported
Maximum airflow23.4 cfm
Maximum air pressure1.9 mmH2O
Airflow39.76 m³/h
Number of fans1 fan(s)
Mounting hole pattern (W x D)71.5 x 71.5 mm
Compatible processor seriesNot supported
Rotational speed (min)200 RPM
Rotational speed (max)3000 RPM
Noise level0.3 sone
Bearing typeFluid Dynamic Bearing (FDB)
Number of fan blades5
Design
Fan connector4-pin
Number of fans1 fan(s)
Product colourBlack
Cable length0.4 m
Number of fan blades5
Ports & interfaces
Fan connector4-pin
Power
Voltage12 V
Weight & dimensions
Width80 mm
Package width82.5 mm
Package depth26 mm
Package weight99 g
Depth25 mm
Package height82.5 mm
Height80 mm
Weight81 g
Cable length0.4 m
Technical details
Fan connector4-pin
Mounting hole pattern (W x D)71.5 x 71.5 mm
Packaging data
Package typeBox
Packaging content
Screws includedYes
Number of screws4
Package typeBox
Other features
Mounting hole pattern (W x D)71.5 x 71.5 mm