ARCTIC BioniX P140 (Grey/White) – Pressure-optimised 140 mm Gaming Fan with PWM PST

ARCTIC BioniX P140 (Grey/White) – Pressure-optimised 140 mm Gaming Fan with PWM PST

140 mm, 200 - 1950 RPM, PWM, 77.6 CFM, 131.92 m3/h, 12 V DC, 2x 4-pin, 181 g, Grey/White

Trade Prices

Distributor Product SKU Stock Updated Price
EET

Bionix P140 (Grey/White) -

 ACFAN00160A Register free see stock

Reasons To Buy

Optimised for Static Pressure

During the development of the new BioniX P140, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use on heatsinks and radiators.

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.<br>Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.

200 to 1950 RPM regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and<br>greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Description

BioniX P140
Pressure-optimised 140 mm Gaming Fan with PWM PST

The BioniX P140 fan features completely redesigned fan blades and is optimised for high static pressure. Thus, the BioniX P140 is especially effective when used on heatsinks and with higher air resistance.
The wide RPM range from 200 to 1950 RPM can be regulated seamlessly and synchronously with other fans thanks to ARCTIC's PWM Sharing Technology (PST).
The newly developed motor with a low coil temperature significantly increases the life span of the fan. Therefore we have extended the warranty to 10 years.

Specifications

Performance
Suitable locationComputer case
Pulse-width modulation (PWM) supportYes
Fan connector4-pin + 4-pin
TypeFan
Fan diameter14 cm
Supported processor socketsNot supported
Maximum airflow77.6 cfm
Maximum air pressure2.85 mmH2O
Airflow131.92 m³/h
Number of fans1 fan(s)
Mounting hole pattern (W x D)125 x 125 mm
Compatible processor seriesNot supported
Rotational speed (min)200 RPM
Rotational speed (max)1950 RPM
Noise level0.45 sone
Bearing typeFluid Dynamic Bearing (FDB)
Number of fan blades5
Design
Fan connector4-pin + 4-pin
Number of fans1 fan(s)
Product colourGrey, White
Cable length0.4 m
Number of fan blades5
Ports & interfaces
Fan connector4-pin + 4-pin
Power
Voltage12 V
Rated current0.15 A
Power consumption (typical)1.8 W
Weight & dimensions
Width140 mm
Package width148 mm
Package depth35 mm
Package weight230 g
Depth28 mm
Package height148 mm
Height140 mm
Weight181 g
Cable length0.4 m
Technical details
Fan connector4-pin + 4-pin
Mounting hole pattern (W x D)125 x 125 mm
Packaging data
Package typeBox
Packaging content
Screws includedYes
Number of screws4
Package typeBox
Other features
Mounting hole pattern (W x D)125 x 125 mm
Country of originChina
Harmonized System (HS) code84733080