Offer details
Related Products
Description
The NETGEAR 10 Gigabit M7100 series consists of a fully managed, low-latency, line-rate 10G Copper "Base-T" switch solution; 24 ports 10GBase-T (RJ45) that support Fast Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server, storage and network progressive upgrade; 4 ports SFP+ that broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and other DAC connections.
M7100 series is ideal for all organizations considering reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack server access layer; and high-density, high-performance 10GbE backbone architectures.
Layer 2+ with static routing
- M7100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
- L3 fixed routes to the next hop towards the destination network are added to the routing table
- L3 routing is wire-speed in M7100 series hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
- 10GBase-T, like other Base-T technologies, uses the standard RJ45 Ethernet jack
- It is backward compatible, auto-negotiating between higher and lower speeds – thereby not forcing an all at once network equipment upgrade
- Cat5/Cat5E are supported for Gigabit speeds; when Cat6 twisted pair copper cabling is minimum requirement for 10 Gigabit up to 30 meters
- Cat6A or newer Cat7 cabling allow for up to 100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
- 32K MAC addresses; 480Gbps switching fabric; 12K jumbo frames; Auto-iSCSI Flow Acceleration; Auto-EEE Energy Efficient Ethernet
- IPv4/IPv6 comprehensive traffic filtering (ACLs), and prioritization (QoS - DiffServ)
Top-of-rack availability
Two redundant, hot-swap power supplies (one PSU comes with the switch; second optional PSU is ordered separately)
Two removable fan trays provide front-to-back cooling airflow for best compatibility with data center hot aisle / cold aisle airflow patterns
Industry standard management
- Industry standard command line interface (CLI)
- Fully functional NETGEAR web interface (GUI)
M7100 series is ideal for all organizations considering reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack server access layer; and high-density, high-performance 10GbE backbone architectures.
Layer 2+ with static routing
- M7100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
- L3 fixed routes to the next hop towards the destination network are added to the routing table
- L3 routing is wire-speed in M7100 series hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
- 10GBase-T, like other Base-T technologies, uses the standard RJ45 Ethernet jack
- It is backward compatible, auto-negotiating between higher and lower speeds – thereby not forcing an all at once network equipment upgrade
- Cat5/Cat5E are supported for Gigabit speeds; when Cat6 twisted pair copper cabling is minimum requirement for 10 Gigabit up to 30 meters
- Cat6A or newer Cat7 cabling allow for up to 100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
- 32K MAC addresses; 480Gbps switching fabric; 12K jumbo frames; Auto-iSCSI Flow Acceleration; Auto-EEE Energy Efficient Ethernet
- IPv4/IPv6 comprehensive traffic filtering (ACLs), and prioritization (QoS - DiffServ)
Top-of-rack availability
Two redundant, hot-swap power supplies (one PSU comes with the switch; second optional PSU is ordered separately)
Two removable fan trays provide front-to-back cooling airflow for best compatibility with data center hot aisle / cold aisle airflow patterns
Industry standard management
- Industry standard command line interface (CLI)
- Fully functional NETGEAR web interface (GUI)
Specifications
Management features | |
---|---|
Multicast support | Yes |
Switch layer | L2+ |
Switch type | Managed |
Web-based management | Yes |
System event log | Yes |
Quality of Service (QoS) support | Yes |
Ports & interfaces | |
Copper ethernet cabling technology | 1000BASE-T, 100BASE-T, 10BASE-T |
SFP+ module slots quantity | 4 |
Basic switching RJ-45 Ethernet ports quantity | 4 |
USB 2.0 ports quantity | 1 |
SFP/SFP+ slots quantity | 24 |
Console port | RS-232 |
Power connector | DC-in jack |
Network | |
IGMP snooping | Yes |
Copper ethernet cabling technology | 1000BASE-T, 100BASE-T, 10BASE-T |
Networking standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Port mirroring | Yes |
Number of VLANs | 1024 |
Link aggregation | Yes |
IP routing | Yes |
Flow control support | Yes |
Broadcast storm control | Yes |
10G support | Yes |
Virtual LAN features | |
VLAN support | Yes |
Number of VLANs | 1024 |
Data transmission | |
Number of VLANs | 1024 |
MAC address table | 32000 entries |
Supported data transfer rates | 10/100/1000 Mbps |
Number of static routes | 64 |
Switching capacity | 480 Gbit/s |
Store-and-forward | Yes |
Jumbo frames support | Yes |
Maximum data transfer rate | 10 Gbit/s |
Performance | |
Stackable | Yes |
Processor frequency | 750 MHz |
Memory type | DDR2-SDRAM |
Mean time between failures (MTBF) | 180178 h |
Internal memory | 512 MB |
Flash memory | 128 MB |
Firmware upgradeable | Yes |
Built-in processor | Yes |
Processor model | Cavium CN5230-750 |
Power | |
Power connector | DC-in jack |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 195.2 W |
Optical fiber | |
Fiber ethernet cabling technology | 1000BASE‑LX, 1000BASE‑SX |
Security | |
SSH/SSL support | Yes |
MAC address filtering | Yes |
IGMP snooping | Yes |
Access Control List (ACL) | Yes |
DHCP features | DHCP server, DHCP client |
Multicast features | |
Multicast support | Yes |
Protocols | |
Management protocols | SNMP, LLDP, LLDP-MED, TFTP, SFTP, HTTP, SCP |
Design | |
Rack mounting | Yes |
Safety | CE, CSA, UL |
Product colour | Grey |
Stackable | Yes |
LED indicators | Yes |
Electromagnetic compatibility | CE, FCC, EN 55022, C-Tick, EN 50082-1, EN 55024 |
Cable management | Yes |
Operational conditions | |
Storage temperature (T-T) | -20 - 70 °C |
Storage relative humidity (H-H) | 0 - 95% |
Operating temperature (T-T) | 32 - 122 °F |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 0 - 90% |
Non-operating altitude | 0 - 10000 m |
Weight & dimensions | |
Width | 440 mm |
Depth | 431 mm |
Height | 43 mm |
Weight | 6.3 kg |
Packaging data | |
Cables included | AC, RS-232 |
Other features | |
Power LED | Yes |
Packaging content | |
Cables included | AC, RS-232 |