Cisco Catalyst WS-SUP720-3BXL network switch Managed
- Brand: Cisco
- Category:
- SKU: WS-SUP720-3BXL
- EAN: 4054318534883
Catalyst 6500 Series/Cisco 7600 Series Supervisor Engine 720 Fabric Multilayer Switch Feature Card 3 (MSFC3) and Policy Feature Card 3BXL (PFC3BXL)
Offer details
Description
The Cisco® Catalyst® 6500 Series/Cisco 7600 Series Supervisor Engine 720-3BXL (Sup 720-3BXL) is the third-generation supervisor engine for the Cisco Catalyst 6500 Series Switch and Cisco 7600 Series Router. It addresses the growing data-plane requirements of service provider and enterprise customers by delivering scalable, enhanced services such as hardware-accelerated IPv4, IPv6, and Multiprotocol Label Switching (MPLS). The Cisco Sup 720-3BXL integrates a high-capacity crossbar switching fabric that can deliver up to 40-Gbps capacity per slot for a total system capacity of 720 Gbps.
The Cisco Sup 720-3BXL integrates a high-performance 720-Gbps switch fabric with a new routing and forwarding engine into a single module. The integrated switch fabric provides up to 40-Gbps full-duplex capacity per slot, allowing it to support third-generation high-performance, high-density Gigabit Ethernet and 10-Gigabit Ethernet interfaces as well as all existing LAN, WAN, and services modules, including the widely deployed FlexWAN and optical services modules to address a broad range of WAN edge aggregation deployments from DS-0 through OC-48/STM-16.
The Cisco Sup 720-3BXL builds on the proven Cisco Express Forwarding architecture by supporting centralized forwarding (Cisco Express Forwarding) and distributed forwarding (distributed Cisco Express Forwarding) to provide a highly scalable and cost-effective platform.
The Cisco Sup 720-3BXL delivers a modular, resilient, scalable, and secure Layer 2 or Layer 3 solution by:
- Enabling advanced IP services such as MPLS, IPv6, and quality of service (QoS).
- Supporting high-performance, third-generation Ethernet interfaces.
- Delivering predictable and scalable system performance up to a sustained 400 Mpps using distributed forwarding cards (DFCs).
- Scaling hardware-capable Forwarding Information Base (FIB) table entries to 1 million routes.
- Supporting all three generations of Ethernet line cards, optical services modules, FlexWAN, and services modules for investment protection.
- Delivering up to 40-Gbps full-duplex capacity per slot.
- Delivering 200-Mpps hardware-based IPv6 using DFCs.
- Providing for 256,000 NetFlow entries.
Extensive feature support such as QoS mechanisms, hardware-based generic-routing-encapsulation (GRE) tunneling, and access control lists (ACLs) enable customers to build high-performance, feature-rich networks capable of offering services such as MPLS VPNs, metropolitan (metro) aggregation, and various WAN edge services.
The Cisco Sup 720-3BXL integrates a high-performance 720-Gbps switch fabric with a new routing and forwarding engine into a single module. The integrated switch fabric provides up to 40-Gbps full-duplex capacity per slot, allowing it to support third-generation high-performance, high-density Gigabit Ethernet and 10-Gigabit Ethernet interfaces as well as all existing LAN, WAN, and services modules, including the widely deployed FlexWAN and optical services modules to address a broad range of WAN edge aggregation deployments from DS-0 through OC-48/STM-16.
The Cisco Sup 720-3BXL builds on the proven Cisco Express Forwarding architecture by supporting centralized forwarding (Cisco Express Forwarding) and distributed forwarding (distributed Cisco Express Forwarding) to provide a highly scalable and cost-effective platform.
The Cisco Sup 720-3BXL delivers a modular, resilient, scalable, and secure Layer 2 or Layer 3 solution by:
- Enabling advanced IP services such as MPLS, IPv6, and quality of service (QoS).
- Supporting high-performance, third-generation Ethernet interfaces.
- Delivering predictable and scalable system performance up to a sustained 400 Mpps using distributed forwarding cards (DFCs).
- Scaling hardware-capable Forwarding Information Base (FIB) table entries to 1 million routes.
- Supporting all three generations of Ethernet line cards, optical services modules, FlexWAN, and services modules for investment protection.
- Delivering up to 40-Gbps full-duplex capacity per slot.
- Delivering 200-Mpps hardware-based IPv6 using DFCs.
- Providing for 256,000 NetFlow entries.
Extensive feature support such as QoS mechanisms, hardware-based generic-routing-encapsulation (GRE) tunneling, and access control lists (ACLs) enable customers to build high-performance, feature-rich networks capable of offering services such as MPLS VPNs, metropolitan (metro) aggregation, and various WAN edge services.
Specifications
Performance | |
---|---|
Stackable | Yes |
Internal memory | 1024 MB |
Flash memory | 64 MB |
Management features | |
Switch type | Managed |
Quality of Service (QoS) support | Yes |
Ports & interfaces | |
SFP module slots quantity | 1 |
Basic switching RJ-45 Ethernet ports quantity | 2 |
Combo SFP ports quantity | 1 |
SFP/SFP+ slots quantity | 1 |
Network | |
Full duplex | Yes |
Data transmission | |
Switching capacity | 40 Gbit/s |
Maximum data transfer rate | 1 Gbit/s |
Design | |
Safety | UL 60950, EN 60950, CSA-C22.2 No. 60950, IEC 60950, AS/NZS 3260, IEC 60825-1,-2, EN 60825 -1,-2, 21CFR1040-10, TS001 |
Stackable | Yes |
Certification | FCC Part 15 (CFR 47) Class A, ICES-003 Class A, EN 55022 Class A, CISPR 22 Class A, AS/NZS 3548 Class A, VCCI Class A, EN55024, ETS300 386, EN50082-1, EN61000-6-1 |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
Storage temperature (T-T) | -40 - 75 °C |
Relative humidity | 10 - 90% |
Operating temperature (T-T) | 0 - 40 °C |
Heat dissipation | 1345 BTU/h |
Other features | |
Dimensions (WxDxH) | 379 x 403 x 40 mm |
Connectivity technology | Wired |
Power supply | 394 W |
Performance management | RME & CiscoWorks |
Bundled software | 12.2(17a)SXA |
Switch fabric speed | 720 Gbps |